Hot Shear

WeiAo single-log furnace is actually the pre-heat stage for the log prior to extrusion. 

In the furnace, the log will be heated intensely and rapidly by LPG or Natural gas. We then use hydraulic method to cut the log by hot shear as well as feed-in and retreating.

All main electric components used are original international well-known brands. The whole heating and cutting process (for feed-in,brushing, heating to cutting) is controlled by PLC.

The critical point of technology to this furnace is the control of temperature to the billet. Our engineers need to ensure the furnace temperature can increase significantly and rapidly but without any billet melting. And we did this!

After that the billet is devlier to the extruder for extrusion. If the remaining log is shorter than 250mm, the automatic system will give out warning singal to user for change.

WeiAo Single log furnace with hot shear:

                  
Advantage:
-Meet the different requirements of billet length greatly.
-High rate of finished products.
-Less scrap.
-PLC automatic.
-Choose Honeywell pneumatic control for gas.